Wireworks Introduces MCat5 Network Multi-Cable

Wireworks out of Hillside, New Jersey is preparing to announce a new multi-cable with Cat5 connectors called MCat5. Think of the MCat5 cable and connectors as a Socapex break-in and break-out cable for networking with Cat5 cables. The MCat5 makes running multiple lines of networking cable quick and easy by combining 6 individual lines into one and then broken out or in at either end.

Where could this be useful, think of running multiple network feeds to a tech table in the house or multiple line to a truss or batten where a lighting network is in use.

The cabling device uses a sturdy multipin connector in place of standard RJ45 connectors for creating a rugged point-to-point connection. The MCat5 is made of heavy-duty CATe rated cable with a extra-tough double jacketed shielded cable design. With a small overall diameter of 0.57″ and weighing 14 lbs. per 100′, the MCat 5 is designed to be easy to work with and hold up to the rigorous demands of tour and live production.

Each of the tails supports six channels or runs of 10/100/1000BASE-T signal. Tail sets are also available to support 12 channels or runs of 10/100BASE-T using cable sharing technology. Each individual RJ45 connector on either end of the tail sets are color coded for easy identification.

Runs up to 250′ are available with either standard RJ45 or ethercon connectors on the tail sets. Pricing has not be released yet.  For more information on the MCat5 from Wireworks, visit their web site at www.wireworks.com.

Lex Products Releases 6 Circuit Live Tester

Back during the time of LDI 2008, Lex Products sent us a beta of one of their latest products, the LSC 6Circuit Live Tester. After some testing and industry input, Lex has announced the release of the 6 Circuit Live Tester.

The LSC 6Circuit Live Multi-Cable Tester is the first portable 19-pin tester that tests and diagnoses cabling problems while the cable is still installed. Unlike conventional 19-pin testers which require cables to be tested from both ends, the tester plugs directly into the end of any energized, dimmed or undimmed six-circuit cable.

The LSC 6Circuit™ Live Tester‘s rugged solid rubber construction is a great addition to any tech toolbelt, or tool kit, or test bench.

Features:

• Tests LIVE 120 VAC 19 Pin cables and connectors
• Verifies power on each of the circuits
• Diagnoses both broken and swapped wires and pins
• Provides 3 diagnostic LEDs for each circuit, similar to popular electrician’s single-circuit testers
• Extremely convenient, compact and easy to use
• Durable rubber construction…a great addition to any tech tool kit
• Complete with canvas belt pouch

Pricing has not been released to the public.  To learn more about the Lex LSC 6Circuit Live Tester, visit their website at www.lexproducts.com.  For pricing, contact your local Lex Sales Associate.