Acme Lighting’s Sana series pairs a 1200W CMY profile and a 1000W beam in a shared design language, giving LDs a matched set that pulls from the same look without compromising on either end.

Sana Profile

The Sana Profile runs a 1200W discharge source with a 6.5°–40° zoom ratio — a 6:1 range that covers tight aerial work and wide washes from the same unit. The optical train includes a full framing system with four individually rotating blades, CMY color mixing with a CTO slot, a dual rotating prism stack, and a built-in haze filter that adds atmospheric diffusion without a separate effects wheel.

Color is CMY plus a fixed CTO and a color wheel with seven dichroic positions. Dual frost options cover variable diffusion. Pan range is 540° and tilt is 270°, both with 16-bit resolution. Dimming is electronic with four curve modes.

Key specs: 1200W discharge, 6.5°–40° zoom, four-blade framing system, CMY+CTO, dual rotating prisms, built-in haze filter, 540°/270° pan/tilt, IP20, DMX/RDM.

Sana Beam

The Sana Beam steps down to a 1000W source and locks in at a tight 5° beam angle — purpose-built for aerial punch rather than versatility. Dual rotating prisms (linear and circular) give it enough mid-air texture to work beyond a straight beam, and a variable frost adds a wash mode when needed.

Color handling is CMY plus a color wheel, matching the Profile’s palette for consistent color across a rig running both fixtures. Pan is 540°, tilt 270°, both 16-bit. The Sana Beam shares the same yoke profile and hardware aesthetic as the Profile, keeping the two fixtures visually cohesive when hung together.

Key specs: 1000W discharge, 5° beam angle, dual rotating prisms, variable frost, CMY+color wheel, 540°/270° pan/tilt, IP20, DMX/RDM.

More from Acme Lighting: en.acmelighting.com